Ares 5kWh All-in-One ESS with 5.5KW Inverter

The Ares 5kWh All-in-One ESS with 5.5KW Inverter comes with a 5-year warranty covering the LiFePO4 battery cells and integrated BMS. Our LiFePO4 cells are rated for 2,000-4,000 charge-discharge cycles, providing 5-10 years of reliable daily use under normal operating conditions. Spare parts and technical support are available throughout the warranty period.

The MOQ is typically 20 units per model for standard products. Sample orders of 1 unit are welcome for testing and evaluation. For OEM/ODM custom packaging or private labeling, the MOQ is 500 units. Contact our sales team for specific pricing based on your order volume.

The Ares 5kWh All-in-One ESS with 5.5KW Inverter provides 5,120Wh of stored energy (approximately 4,608Wh usable at 90% depth of discharge). At an average essential-load draw of 500W (lights, router, refrigerator, and TV), it can sustain power for approximately 9.2 hours. At 1,000W, runtime is approximately 4.6 hours. Actual runtime depends on total connected load and usage patterns.

The Ares 5kWh All-in-One ESS with 5.5KW Inverter features a 5.5KW hybrid inverter with 230V AC output. At 5.5KW, it can simultaneously run household appliances such as refrigerators (150-400W), LED lighting (10-50W), televisions (50-150W), computers (100-300W), and smaller air conditioning units. The inverter also supports surge power for motor startups. For high-power devices like electric ovens or heat pumps, verify the combined load does not exceed the continuous 5.5KW rating.

Yes. The Ares 5kWh All-in-One ESS with 5.5KW Inverter supports grid-tied, off-grid, and hybrid operation modes. It features an integrated MPPT solar charge controller with a PV input voltage range of 120V-500V, making it compatible with a wide range of monocrystalline and polycrystalline solar panel configurations. The system automatically switches to backup power during grid outages and can store excess solar energy for nighttime use.

The Ares all-in-one ESS integrates the LiFePO4 battery bank, hybrid inverter, MPPT charge controller, and BMS into a single floor-standing cabinet. This pre-wired, factory-tested design significantly reduces installation time and complexity compared to separate component systems. It includes WIFI monitoring for remote system status tracking via mobile app.